Custom Gaging & Fixtures
Inspection that predicts field performance.
We build the gages that close the loop.
We design and build custom gaging in-house, tied directly to the same datums and control schemes used in tooling and stamping.
Fixtures are built, verified, and correlated on real production parts—so measurement results match how the part is actually made and used.
Datum-Matched Gage Design
Datum-Matched Gage Design
We align gaging datums with the same references used in die and press setups.
→ Measurement results reflect true process behavior, not abstract coordinate systems.
→ Measurement results reflect true process behavior, not abstract coordinate systems.
GR&R-Backed Validation
GR&R-Backed Validation
Each gage is verified for repeatability and reproducibility before release.
→ Confidence in every capability report, audit, and launch.
→ Confidence in every capability report, audit, and launch.
Thin, Coined & Formed Part Fixturing
Thin, Coined & Formed Part Fixturing
We design fixtures for parts that CMM probes can’t read reliably.
→ Stable measurement of delicate or flexible geometry.
→ Stable measurement of delicate or flexible geometry.
Sensorized & Automated Gages
Sensorized & Automated Gages
Add contact or non-contact sensors, limit switches, or go/no-go checks for in-line use.
→ Faster feedback, less manual handling, fewer missed trends.
→ Faster feedback, less manual handling, fewer missed trends.
Correlated Inspection Plans
Correlated Inspection Plans
CMM and custom gage data are correlated at launch.
→ Eliminates cross-plant variation and arguments over “whose measurement is right.”
→ Eliminates cross-plant variation and arguments over “whose measurement is right.”
Calibration & Maintenance Programs
Calibration & Maintenance Programs
We provide calibration points, adjustment tools, and PM plans.
→ Long-term consistency and audit readiness.
→ Long-term consistency and audit readiness.
Frequently Asked Questions (FAQ)
Can you design fixtures for existing parts or tooling?
Yes—send us part prints or CMM data; we’ll create a fixture concept and correlation plan.
What accuracy can you achieve?
Fixture components are built to 0.0001″; repeatability verified through GR&R studies.
Do you integrate automation or sensors?
Yes—optical, limit, and height sensors available for in-line inspection or press-side checks.
What comes with delivery?
Gage CAD, GR&R summary, calibration guide, inspection plan, and maintenance checklist.
Measure what matters.
Request a gaging plan built to your tooling datums—GR&R-ready and aligned to real production.