+1 (262) 255 0223
ELECTRICAL & POWER
Engineered for Conductivity. Built for Compliance.
Electrical manufacturers face rising demands for precision, performance, and compliance—leaving no room for component failures or rework.
Gromax delivers precision-stamped electrical components that meet tight tolerances, electrical specs, and regulatory requirements—providing production-ready, fully documented solutions at scale to help OEMs and Tier 1/2 suppliers build reliable, compliant electrical systems.
Production-Ready Stamped Parts
Our stamped products are purpose-built for integration into electrical systems requiring conductivity and compliance.
Current-Carrying Terminals and Busbars
Stamped from C110 copper, C19210 bronze, and other high-conductivity alloys for:
• Electrical Power Distribution Panels
• Switchgear Assemblies
• Motor Control Centers (MCCs)
• Battery Energy Storage Systems (BESS)
• Electric Vehicle (EV) Powertrains
• Switchgear Assemblies
• Motor Control Centers (MCCs)
• Battery Energy Storage Systems (BESS)
• Electric Vehicle (EV) Powertrains
EMI/RFI Shields and Foil Housings
Critical for electrical enclosure and interference control for:
• EMI Shielded Electronic Enclosures
• Telecom Base Station Equipment
• Medical Device Controllers
• Industrial Control Systems
• Telecom Base Station Equipment
• Medical Device Controllers
• Industrial Control Systems
Grounding Clips and Contacts
Stamped and formed with clean shearing and dimensional stability for:
• Electrical Power Panels
• Switchgear and MCCs
• Consumer Appliance Electrical Assemblies
• Lighting Fixtures
• Electrical Junction Boxes
• Switchgear and MCCs
• Consumer Appliance Electrical Assemblies
• Lighting Fixtures
• Electrical Junction Boxes
Overmold-Ready Inserts
Prepped for insert molding into electrical connectors and assemblies for:
• Electrical Connectors
• Sensor Assemblies
• Power Cord Plugs and Receptacles
• Control Switches and Pushbuttons
• Sensor Assemblies
• Power Cord Plugs and Receptacles
• Control Switches and Pushbuttons
Custom Brackets and Hardware
Provide structural support, mounting functionality, or mechanical integration for:
• Electrical Enclosures
• Panelboards and Load Centers
• Industrial Control Panels
• Switchgear Frames
• Power Distribution Boxes
• Panelboards and Load Centers
• Industrial Control Panels
• Switchgear Frames
• Power Distribution Boxes
Press-Fit Pins and Electrical Interconnects
Stamped for high-retention electrical/mechanical joining
• Printed Circuit Boards
• Power Distribution Units
• Automotive Electronic Control Units
• Industrial Automation Controllers
• Telecommunications and Networking Equipment
• Energy Storage and EV Battery Modules
• Medical Devices
• Aerospace and Avionics Electronics
• Power Distribution Units
• Automotive Electronic Control Units
• Industrial Automation Controllers
• Telecommunications and Networking Equipment
• Energy Storage and EV Battery Modules
• Medical Devices
• Aerospace and Avionics Electronics
Why Choose Gromax
Precision Stamping for Electrical Performance
We achieve tight tolerances (as low as ±0.0015”) and clean shearing for conductive components like terminals, busbars, and contacts—ensuring optimal electrical continuity, minimal burrs, and plating-ready finishes.
Material Expertise in Conductive Alloys
We achieve tight tolerances (as low as ±0.0015”) and clean shearing for conductive components like terminals, busbars, and contacts—ensuring optimal electrical continuity, minimal burrs, and plating-ready finishes.
Compliance Built Into Every Part
Gromax is ISO 9001:2015 certified and ITAR registered, delivering electrical components with full compliance documentation: PPAP, FAIR, CMM reports, plating certifications, and lot-level traceability.
Production-Ready Tooling & Scalability
Our in-house tool & die design and progressive die stamping capabilities enable seamless transitions from prototype to production—scaling from pilot runs to millions of parts without sacrificing quality.
Integrated Secondary & In-Die Operations
We reduce costs and lead times by integrating coining, forming, tapping, and parting directly into the die, minimizing downstream processing for high-volume electrical components.
Engineering Support at Every Stage
From design-for-manufacturability (DFM) reviews to rapid prototyping and qualification runs, our engineering team partners closely with yours to ensure manufacturable, cost-effective stamped solutions.
Trusted by OEMs & Tier 1 Suppliers
Electrical manufacturers rely on Gromax for critical stamped components used in power distribution panels, busbar assemblies, EMI/RFI shielding, electrical connectors, and control panels.
Solving Your Real-World Challenges
“We’re struggling to maintain dimensional accuracy on thick-gauge copper busbars.”
We engineer progressive dies that achieve ±0.002” hole-to-bend and ±0.0015” critical tolerances with CMM validation and in-process SPC.
“Plating delays are jeopardizing our delivery schedule.”
We manage a vetted finishing supply chain with integrated scheduling, traceable certs, and expedited finishing options to keep shipments on time.
“We need serialized traceability per part to meet NEC and UL audit requirements.”
We provide laser marking, MIL-STD-130 UID, barcode/QR codes tied to lot-level or part-level IDs, with serialized traceability logs for compliance audits.
“Our current supplier’s secondary ops are driving up costs and delays.”
We integrate tapping, coining, fastener insertion, and marking directly into the die, reducing downstream operations and improving part-to-part consistency.
“Dimensional and plating compliance failures are creating rework.”
We deliver CMM-verified parts, plating certs per ASTM/MIL specs, and audit-ready documentation—helping you meet both mechanical and surface finish specifications in one source.
Power Your Next Project
Upload your drawing or RFQ to get a quote for precision-stamped, compliance-ready electrical components built to your production needs.